Termite Resistance WPC Hollow Tube Garden Louvre Waterproof With Quick Installation Guide
Product Details
Termite Resistance WPC Hollow Tube
,WPC Hollow Tube Waterproof
,WPC Garden Louvre
Termite Resistance WPC Tube Garden Louvre With Quick Installation Guide
Product Summary
Tailored for damp park landscaping this termite resistance WPC tube garden louver protects park partitions from insect damage. Supplied with a comprehensive quick installation guide it enables local assembly crews to mount profiles without errors.
About this Product
Engineered Immunity to Subterranean Termites
Contains non organic materials woven into the matrix making the garden louvers entirely inedible to wood boring pests.
Foolproof Assembly via Quick Installation Guide
The detailed illustrated manual takes away the guesswork reducing alignment trial and error and cutting site labor hours significantly.
Perfect Longevity for Ground Contact Areas
Ideal for garden screen walls that sit close to insect rich wet soil ensuring the profile stays intact without pest hollow out failures.
Reduced Training Costs for Landscape Contractors
The combination of pre shaped profiles and a step by step guide allows smaller crews to finish park screens with minimal training.
Performance Advantages
How to Install
1) Jointing Methods
-
Connector joint: Use matching metal/plastic internal/external connectors. Pre-drill holes + fix with stainless steel self-tapping screws.
-
Adhesive bonding: Apply WPC-specific adhesive/structural glue. Clean → glue → join → clamp → cure (24h).
-
45° miter joint: Cut ends at 45° for corners; secure with angle brackets and screws.
2) Fixing Methods (Wall/Ceiling/Partition)
-
Clip-on (quick install): Use aluminum spring clips to attach directly to metal studs/frames; no screws, removable.
-
Bracket/angle fix: Use stainless steel L-brackets. Pre-drill tube walls, fasten to wall/ceiling substrate.
-
Pipe clamps/hangers: For horizontal runs, use U-clamps/hangers on light steel keels; spacing ≤60cm.
-
Post mounting (fence/grille): Embed posts in concrete or fix to ground with flange plates + expansion bolts.
3) Key Installation Tips
-
Cutting: Use fine-tooth saw/circular saw; keep cuts clean and deburred.
-
Expansion gap: Leave 3–5mm between tubes for thermal expansion.
-
Pre-drill: Always pre-drill before screwing (hole ≈ 3/4 screw diameter) to avoid cracking.
-
Drainage: Install outdoor tubes with slight slope or drill drain holes to prevent water buildup/mold.
Technical Specifications
| NO. | Test Items | Requirements | Results | Test Methods |
| 1 | Surface abrasion resistance,g/100r | ≤0.15,and the paint film is not worn through | 0.100 | ✔pass |
| 2 | Colour fastness to light, class | Gray Card≥4 | 4 | ✔pass |
| 3 | Formaldehyde emission,mg/m³ | ≤0.05 | Not detected | ✔pass |
| 4 | Minimum concentrated load, N | ≥3400 | 3492 | ✔pass |
| 5 | Static bending strength,MPa | ≥26.0 | 26.5 | ✔pass |
| 6 | Elastic modulus, MPa | ≥3000 | 4600 | ✔pass |
| 7 | Water absorption, % | ≤1.0 | 0.9 | ✔pass |
| 8 | Falling hammer impact at low temperature | No crackat thetemperature of -10°C | pass | ✔pass |
| 9 | Anti-slippery value | ≥35 | 36 | ✔pass |
Certification
Colors
Section Designs
Our Factory
FAQ
Q1: Do we need to apply anti termite chemical fluids on the raw cut ends of the WPC tube?
A1: No the termite resistance is completely homogenous throughout the whole composite mix so cutting any side exposes the same insect proof density.
Q2: In what format is your quick installation guide supplied to buyers?
A2: We provide printed illustrated step booklets inside the hardware packaging boxes alongside clear 3D alignment drawings for immediate reference.
Q3: Can this garden louver tube handle high humidity conditions near outdoor water fountains?
A3: Yes the heavy poly-composite matrix is designed to endure wet spray conditions around garden water fountains without rotting or peeling.
Q4: What tools are required to follow the quick installation system successfully?
A4: Standard construction site gear like an electric screwdriver crosshead screws measuring tape and a spirit level are all you need.
-
Durable Anti Scratch WPC Panels For Interior Waterproof 160*20mm
High Durability Anti-scratch Ideal for Interior WallsProduct SummaryThis 160mm*20mm reinforced seamless WPC wall panel is professionally crafted for premium interior spaces. Its 20mm heavy-duty structure provides superior impact resistance and nail-holding power, ensuring the wall remains stable ... -
160*24mm WPC Fluted Louver Wall Panel Interior Stain Proof
160mm*24mm Stain-Proof Interior WPC Fluted Louver Wall Panel Product Summary Utilizing synchronized multi-layer thermal co-extrusion, a hydrophobic and oleophobic protective shield encapsulates the structural composite core profile. This stain-proof armor creates a highly dense, non-porous physical ... -
160mm Interior WPC Fluted Louver Wall Panel Sunproof Fade Resistance
160mm Fade-Defiant & Sun-Proof Interior WPC Fluted Louver Wall Panel Product Summary Utilizing a synchronized thermal co-extrusion process, a highly sun-proof and fade-defiant protective jacket encapsulates the composite structural core. This technical armor relies on inherent photochemical ... -
Waterproof Interior WPC Wall Panel Anti Warp Wood Plastic Composite Sheet
Interior WPC Wall Panel Waterproof Anti Warp Product Name Exclusively engineered for high-humidity indoor hospitality lounges, premium spa wall claddings, and commercial basements demanding dual perfection in hydrological biosecurity and geometric alignment, this premium Interior WPC Wall Panel ...
