219mm Eco Shielded Exterior WPC Wall Panel Co Extrusion Fade Resistant
Product Details
219mm Exterior WPC Wall Panel
,Eco Shielded Exterior WPC Wall Panel
,Panel WPC Exterior Fade Resistant
219mm Eco-Shielded & Fade-Resistant Co-Extrusion Outdoor WPC Wall Panel
Product Summary
Utilizing a synchronized thermal fusion method, a resilient, eco-friendly polymer defense shield completely envelops the rigid core matrix. This technical jacket completely blocks moisture ingress while offering an advanced weather barrier that easily withstands heavy rainfall and intense UV radiation. Featuring rich, deep-embossed organic grain patterns, it infuses luxurious architectural depth into any vertical facade without the need for lifetime painting, delivering a sustainable and everlasting finish for luxury estates and commercial storefronts.
About this Product
-
Complete Moisture-Lock Polymer Shield
-
Engineered as a premium second-gen outdoor WPC wall panel, the co-extruded outer cap leaves no exposed wood fibers, creating an impenetrable waterproof boundary that stops moss, rot, and fungi.
-
-
Color-Lock Technology Against Sun Bleaching
-
The high-performance shield contains built-in UV-blocking matrices that prevent the cladding from sun-bleaching, keeping the exterior wall vibrant and rich in tone for over 25 years.
-
-
Non-Warping Cross-Section Stability
-
Reinforced by the multi-layered extrusion process, this panel resists cross-sectional warping, twisting, and thermal bowing, maintaining flawlessly aligned interlocking joint lines.
-
-
Multi-Dimensional Wood-Grain Depth
-
Instead of a flat plastic appearance, the shield features randomized grain depth and multi-chromatic color blending, delivering the prestigious tactile luxury of expensive exotic hardwoods.
-
Technical Specification
| No. | Parameter | Standard Specification | Test Method |
| 1 | Formaldehyde | E0 Grade (≤ 0.05 mg/m³) or Not Detected | EN 717-1 / ISO 16000 |
| 2 | Flexural Strength | ≥ 25 MPa | ASTM D790 / EN 310 |
| 3 | Flexural Modulus | ≥ 2,500 MPa | ASTM D790 |
| 4 | Brinell Hardness | ≥ 80 MPa | EN 15534-1 |
| 5 | Falling Mass Impact | No cracks, residual indentation ≤ 0.15 mm | EN 15534-4 |
| 6 | Water Absorption (24h) | ≤ 0.5%(Excellent waterproof barrier) | ASTM D1037 / EN 317 |
| 7 | Moisture Swelling Rate | Thickness: ≤ 0.9% / Width & Length: ≤ 0.1% | EN 15534 |
Certification
How to Install
Ensure the base wall is flat, dry, and structurally sound. Install a moisture barrier if necessary. Fix the substructure joists (aluminum, steel, or treated timber) vertically or horizontally depending on your panel orientation. Joist spacing (span) must be less than 50cm (ideally 35cm to 45cm) to prevent panel deflection.
Ensure a continuous air gap of at least 25mm behind the panels. This allows supply air to enter from the bottom and exit from the top, preventing trapped moisture, mold, and heat buildup behind the facade.
Install the starter clips or position the first WPC panel at the base or corner of the wall. Use flat-head self-tapping stainless steel screws to secure the female/male joint point directly onto the joist frame. Use level tools to ensure it is perfectly plumb.
Slide the next panel into the groove of the previous one. Crucial EEAT Requirement: Due to natural thermal expansion and contraction, if installing under 20°C, a 2mm to 5mm gap is strictly required at each butt joint (end-to-end connection) where two wall panels meet. Use extra joists at the ending of each panel to support joint points.
Install matching WPC corner trims, L-profiles, or fascia boards to cover exposed edges, windowsills, and door frames, sealing the system nicely against water ingress while maintaining a sleek aesthetic.
Gap is King
Never butt panels tight end-to-end; leave a 2-5mm thermal expansion gap. Always leave 25mm space behind the panels for airflow.
Solid Base
Do not screw directly into concrete. Max joist spacing: 50cm.
Application Gallery
Colors
Our Factory
FAQ
Q1: Will the surface shield of this second-gen outdoor WPC panel become sticky in intense heat?
A1: No, absolutely not. The outer shield is made from a specialized high-density polymer compound with a high thermal melting point. It remains completely dry, rigid, and non-sticky even when directly exposed to intense summer heatwaves reaching up to 70°C.
Q2: Does the co-extrusion wall panel contain any toxic chemical flame retardants?
A2: No. Our second-generation panels achieve an advanced fire-retardant rating (Class B1) through non-toxic, eco-friendly mineral additives integrated during the extrusion process. It releases no heavy metals or toxic halogen gases, making it perfectly safe for eco-conscious residential facades.
Q3: What should I use to wash off hard water mineral stains or water spots from the facade?
A3: Because the outer layer is non-porous, water spots or mineral scaling from sprinklers sit completely on the surface. You can easily remove them by washing the cladding with a mixture of mild household white vinegar and warm water, followed by a clean water rinse from a standard garden hose.
Q4: Why can't I use a steel wire brush to clean stubborn spots on a second-gen panel?
A4: Steel wire brushes or harsh abrasive pads will micro-scratch and permanently dull the high-tech polymer shield layer. This ruins the beautiful 3D embossed wood-grain texture and thin protective barrier. To clean stubborn debris, always stick to soft nylon-bristled brushes and standard soap detergents.
-
Durable Anti Scratch WPC Panels For Interior Waterproof 160*20mm
High Durability Anti-scratch Ideal for Interior WallsProduct SummaryThis 160mm*20mm reinforced seamless WPC wall panel is professionally crafted for premium interior spaces. Its 20mm heavy-duty structure provides superior impact resistance and nail-holding power, ensuring the wall remains stable ... -
160*24mm WPC Fluted Louver Wall Panel Interior Stain Proof
160mm*24mm Stain-Proof Interior WPC Fluted Louver Wall Panel Product Summary Utilizing synchronized multi-layer thermal co-extrusion, a hydrophobic and oleophobic protective shield encapsulates the structural composite core profile. This stain-proof armor creates a highly dense, non-porous physical ... -
160mm Interior WPC Fluted Louver Wall Panel Sunproof Fade Resistance
160mm Fade-Defiant & Sun-Proof Interior WPC Fluted Louver Wall Panel Product Summary Utilizing a synchronized thermal co-extrusion process, a highly sun-proof and fade-defiant protective jacket encapsulates the composite structural core. This technical armor relies on inherent photochemical ... -
Waterproof Interior WPC Wall Panel Anti Warp Wood Plastic Composite Sheet
Interior WPC Wall Panel Waterproof Anti Warp Product Name Exclusively engineered for high-humidity indoor hospitality lounges, premium spa wall claddings, and commercial basements demanding dual perfection in hydrological biosecurity and geometric alignment, this premium Interior WPC Wall Panel ...
