Co Extrusion Outdoor WPC Wall Panel Weather Armor Luxury Finish
Product Details
Co Extrusion Outdoor WPC Wall Panel
,Outdoor WPC Wall Panel Luxury Finish
Weather-Armor & Luxury-Finish Co-Extrusion Outdoor WPC Wall Panel
Product Summary
Engineered through a specialized synchronized thermal fusion process, a high-density molecular protective shield completely envelops the rugged interior matrix. This technical armor provides uncompromising, all-weather defense against deep moisture absorption and severe sun bleaching. Showcasing highly sophisticated, multi-tonal luxury hardwood aesthetics alongside a lifetime zero-painting profile, it serves as the ultimate premium selection for elite residential estates, luxury resorts, and iconic commercial facades.
Product Features
-
Impregnable Weather-Armor Shield
-
Utilizing advanced second-gen outdoor WPC wall panel engineering, the polymer jacket completely insulates the core from humidity and salt air, eliminating rotting, splitting, and structural decay.
-
-
Professional-Grade Stain & Oil Defense
-
The non-porous exterior armor acts as a permanent shield against greasy organic spills, bird droppings, and industrial smog, allowing dirt to be washed off effortlessly with zero ghosting.
-
-
Color-Lock Advanced UV Barriers
-
Formulated with highly concentrated fading inhibitors inside the shield layer, it locks in the rich, elegant timber tones, ensuring the facade looks freshly installed even after decades of intense tropical sun.
-
-
Zero Structural Delamination Guarantee
-
The protective polymer cap and WPC core are co-extruded simultaneously under extreme heat and pressure, forming a single, inseparable structural body that will never blister or peel.
-
Technical Specifications
| No. | Parameter | Standard Specification | Test Method |
| 1 | Formaldehyde | E0 Grade (≤ 0.05 mg/m³) or Not Detected | EN 717-1 / ISO 16000 |
| 2 | Flexural Strength | ≥ 25 MPa | ASTM D790 / EN 310 |
| 3 | Flexural Modulus | ≥ 2,500 MPa | ASTM D790 |
| 4 | Brinell Hardness | ≥ 80 MPa | EN 15534-1 |
| 5 | Falling Mass Impact | No cracks, residual indentation ≤ 0.15 mm | EN 15534-4 |
| 6 | Water Absorption (24h) | ≤ 0.5%(Excellent waterproof barrier) | ASTM D1037 / EN 317 |
| 7 | Moisture Swelling Rate | Thickness: ≤ 0.9% / Width & Length: ≤ 0.1% | EN 15534 |
Certification
How to Install
Ensure the base wall is flat, dry, and structurally sound. Install a moisture barrier if necessary. Fix the substructure joists (aluminum, steel, or treated timber) vertically or horizontally depending on your panel orientation. Joist spacing (span) must be less than 50cm (ideally 35cm to 45cm) to prevent panel deflection.
Ensure a continuous air gap of at least 25mm behind the panels. This allows supply air to enter from the bottom and exit from the top, preventing trapped moisture, mold, and heat buildup behind the facade.
Install the starter clips or position the first WPC panel at the base or corner of the wall. Use flat-head self-tapping stainless steel screws to secure the female/male joint point directly onto the joist frame. Use level tools to ensure it is perfectly plumb.
Slide the next panel into the groove of the previous one. Crucial EEAT Requirement: Due to natural thermal expansion and contraction, if installing under 20°C, a 2mm to 5mm gap is strictly required at each butt joint (end-to-end connection) where two wall panels meet. Use extra joists at the ending of each panel to support joint points.
Install matching WPC corner trims, L-profiles, or fascia boards to cover exposed edges, windowsills, and door frames, sealing the system nicely against water ingress while maintaining a sleek aesthetic.
Gap is King
Never butt panels tight end-to-end; leave a 2-5mm thermal expansion gap. Always leave 25mm space behind the panels for airflow.
Solid Base
Do not screw directly into concrete. Max joist spacing: 50cm.
Application Gallery
Section Designs
Colors
Our Factory
FAQ
Q1: Does this second-gen co-extrusion wall panel contain any hazardous glues or chemicals?
A1: No, absolutely not. The co-extrusion process relies entirely on high-temperature thermal bonding rather than toxic chemical glues or adhesives. The panel emits zero formaldehyde and zero Volatile Organic Compounds (VOCs), making it completely safe and non-toxic for sensitive residential environments.
Q2: How does the surface hardness of this capped panel compare to traditional composites?
A2: It is vastly superior. The high-density polymer shield is specifically engineered to have a higher Brinell hardness rating compared to first-generation panels. This gives it exceptional resistance against accidental impacts, sweeping tree branches, and heavy wind-borne debris.
Q3: What should I use to clean off stubborn construction dust or dried concrete splatter?
A3: Because the outer armor is non-porous, construction grime sits entirely on the surface. First, soak the area with warm water and standard liquid detergent to loosen the grime. Then, use a soft-bristled nylon brush or a regular domestic pressure washer from a safe distance to wash it clean.
Q4: Why is it still mandatory to use expansion fasteners if the co-extrusion panel is so stable?
A4: While the polymer shield provides world-class stability and near-zero moisture movement, the entire composite panel still experiences microscopic linear thermal expansion during temperature shifts. Using our professional clip-fastener system allows the panels to breathe smoothly without buckling the facade lines.
-
Durable Anti Scratch WPC Panels For Interior Waterproof 160*20mm
High Durability Anti-scratch Ideal for Interior WallsProduct SummaryThis 160mm*20mm reinforced seamless WPC wall panel is professionally crafted for premium interior spaces. Its 20mm heavy-duty structure provides superior impact resistance and nail-holding power, ensuring the wall remains stable ... -
160*24mm WPC Fluted Louver Wall Panel Interior Stain Proof
160mm*24mm Stain-Proof Interior WPC Fluted Louver Wall Panel Product Summary Utilizing synchronized multi-layer thermal co-extrusion, a hydrophobic and oleophobic protective shield encapsulates the structural composite core profile. This stain-proof armor creates a highly dense, non-porous physical ... -
160mm Interior WPC Fluted Louver Wall Panel Sunproof Fade Resistance
160mm Fade-Defiant & Sun-Proof Interior WPC Fluted Louver Wall Panel Product Summary Utilizing a synchronized thermal co-extrusion process, a highly sun-proof and fade-defiant protective jacket encapsulates the composite structural core. This technical armor relies on inherent photochemical ... -
Waterproof Interior WPC Wall Panel Anti Warp Wood Plastic Composite Sheet
Interior WPC Wall Panel Waterproof Anti Warp Product Name Exclusively engineered for high-humidity indoor hospitality lounges, premium spa wall claddings, and commercial basements demanding dual perfection in hydrological biosecurity and geometric alignment, this premium Interior WPC Wall Panel ...
