Recyclable Coextrusion WPC Fence Easy Installation Stain Resistant

Easy installation stain resistant coextrusion WPC fence

Product Summary

This premium engineering breakdown presents the easy installation, stain resistant coextrusion WPC fence designed for fast-paced, low-maintenance landscaping. Featuring an innovative modular tongue-and-groove system and clip locking mechanism, it slashes labor time and on-site installation costs. Simultaneously, its dense 360-degree polymer shielding prevents mud, oil, and graffiti from penetrating the surface. This overview directly solves the headaches of high construction fees and permanent stains, delivering a time-saving, hassle-free outdoor fencing solution.

About this Product

• Fast & Easy Installation Design 

• Engineered with a smart interlocking tongue-and-groove profile and lightweight structural engineering, the panels slide together effortlessly. Standard carpentry tools are all that's required, allowing DIY enthusiasts or professional contractors to install the perimeter in a fraction of the time compared to traditional masonry or wood. 

• Superior High-Density Stain Resistance

• The co-extruded polymer cap forms a non-porous surface that acts as a shield against the outdoor elements. Stubborn stains such as bird droppings, garden oil, mud, and even BBQ grease cannot soak into the material, preventing permanent discoloration or unsightly dark spots. 

• Effortless Wipe-Clean Surface

• Thanks to the stain resistant cap stock, maintenance is practically zero. Most dirt washes away during regular rainfall. For tougher grime, a simple wipe down with a damp cloth or a quick spray with a garden hose is all it takes to restore the fence to its original showroom condition.

Technical Specification

Certification

How to Install

Method 1: In-Ground / Dig-In Installation

[Applicable Scenario] Soft ground surfaces such as gardens, lawns, soil, or sandy ground. This is the most stable method for outdoor fencing.

1. Measurement, Layout, and Alignment: Stretch a string line according to the standard span of the fence (typically 1.8 m) to mark the exact center point of each post. Precision in spacing is critical; otherwise, the fence boards will not fit into the post slots.

2. Digging Post Holes: Dig foundation holes at the marked locations. Standard requirement: Hole diameter is generally 300 mm, with a depth of 500 mm - 600 mm (in cold regions, the depth must extend below the frost line).

3. Setting Posts and Pouring Concrete: Insert the WPC posts (or composite posts with internal steel/aluminum reinforcements) into the holes. Pour in mixed concrete (Grade C20 or above). Key Step: Use a spirit level to repeatedly check and adjust the post in two vertical directions to ensure it is 100% plumb.

4. Curing and Waiting: Temporarily secure the leveled posts with bracing timber and allow the concrete to cure. Typically, a waiting period of 24 to 48 hours is required to ensure the concrete has fully hardened before proceeding with board assembly.

Method 2: Bolt-Down with Base Plate

[Applicable Scenario] Pre-hardened ground surfaces such as concrete slabs, concrete foundations, or brick/stone patios.

1. Positioning and Marking: Align the string line on the hardened ground. Determine the exact position of the post base plates based on the net length of the fence board (e.g., 1750 mm plus the post slot depth). Mark the drill holes through the base plate using a marker.

2. Drilling: Use an impact drill equipped with a drill bit that matches the expansion anchors (usually 12 mm or 14 mm in diameter). Drill vertically into the concrete to a depth of 80 mm - 100 mm. Clean out all dust and debris from the holes.

3. Installing and Securing the Metal Base: Align the galvanized steel or aluminum post support base over the drilled holes. Insert the metal expansion anchor bolts or chemical anchors, and tighten them securely using a socket wrench to anchor the base firmly to the concrete.

4. Sleeving the WPC Post: Slide the outer hollow WPC post sleeve from top to bottom over the fixed metal base plate, then lock the inner and outer layers together at the bottom using self-tapping screws.

Application Gallery

Colors

Accessories

Our Factory

FAQ

Q1: Why is this coextrusion WPC fence considered to have an easy installation process?

A1: Unlike traditional fences that require complex measuring, cutting, and hundreds of screws, our coextrusion fence uses a modular slide-and-lock system. The panels glide seamlessly into dedicated aluminum post tracks and lock together using simple clips, reducing human assembly errors. 

Q2: Can oil or grease stains be completely washed off the stain resistant cap?

A2: Yes. Because the 360-degree engineering polymer shield is non-porous, oil and grease sit entirely on the surface rather than soaking into the inner wood fibers. They can be completely removed with a standard household degreaser, soap, and warm water without leaving any permanent residue. 

Q3: Do I need to buy expensive, specialized tools for this easy installation fence?

A3: Not at all. The fence is designed to be contractor and DIY-friendly. You can use standard woodworking tools you already own, such as a circular saw for cutting panels to custom lengths, a leveling tool, and a standard cordless drill for anchoring the post bases. 

Q4: Will severe weather compromise the stain resistant properties of the outer layer over time?

A4: No. The stain resistant formulation is deeply integrated into the polymer matrix under extreme heat during co-extrusion. It is not a temporary surface coating or spray, meaning it will not peel, wash away, or lose its stain-blocking power after years of exposure to sun and heavy rain.